Vector Optics Maverick 3×26 Magnifier (Old Model SCOT-07) — Flip-to-Side 3× clarity, absolute-height alignment, fast target ID beyond red-dot range

The Vector Optics Maverick 3×26 Magnifier (SCOT-07) extends the practical reach of any 1× red dot by adding crisp, daylight-capable 3× magnification with a rugged flip-to-side mount. Built around a bright 26 mm objective, fully multi-coated optics, and a forgiving 60 mm eye relief, this compact module delivers sharp detail on small targets, vital zones, and distant steel—while the mount lets you return to unmagnified 1× in one quick motion. A precise windage & elevation alignment system allows you to center the dot in the magnifier without touching your red-dot zero, so you keep your established point of impact intact.

Out of the box, the included mount places the optic centerline at approximately 36 mm (1.4″) above the rail—an “absolute co-witness” height that pairs cleanly with many AR-height red dots. The compact 108 mm (4.2″) body and 49 ft @ 100 yd field of view balance speed and precision, making the Maverick 3×26 an easy upgrade for hunting carbines, training rifles, and patrol setups that need both fast CQB handling and confident PID at distance.

Key Parameters

• Magnification: 3× fixed for fast, consistent aiming
• Objective Lens: 26 mm for a bright sight picture
• Eye Relief: 60 mm (2.4″) to accommodate dynamic shooting positions
• Field of View: 49 ft @ 100 yd / ~16.3 m @ 100 m
• Overall Length: 108 mm (4.2″)
• Center Height (with included mount): 36 mm (1.4″) from rail to optical center (absolute-co-witness)
• Weight (with mount): ~325 g (11.65 oz)
• Optics: Fully multi-coated glass for contrast and edge-to-edge clarity
• Body & Finish: 6061-T6 aluminum alloy chassis with protective rubber overmold, matte black
• Mount: Flip-to-side, locking detent, Picatinny/Weaver rail interface
• Recoil Rating: Shockproof for real-fire calibers when properly mounted
• Adjustment: Dedicated windage & elevation alignment to center the dot in view (does not alter red-dot zero)

Real-World Use Cases

Hunting: identify vital zones and take cleaner shots

Flip to 3× to confirm antler points, read wind on vegetation, or pick a precise hold on small game. Flip back to 1× for dense cover or fast movers without losing situational awareness.

Training & competition: speed up transitions, keep your zero

Run 1× for close arrays and barricades, then roll to 3× for small plates or longer-range mini-poppers. The internal X/Y centering keeps the dot visually centered through the glass while your primary zero remains untouched.

Duty & defensive carbines: positive ID at standoff distances

Use 3× to read hands and features at distance or to confirm offset holds with your red dot. The flip-to-side mount returns you to unmagnified 1× immediately for room entries or vehicle work.

Mechanical Properties & Optical Build

• Robust chassis: 6061-T6 aluminum body with rubber armor for impact protection and secure handling.
• Flip-to-side mount: Fast, positive detent and smooth rotation for immediate transitions between 1× and 3×.
• Shockproof design: Built to tolerate typical centerfire recoil on in-spec rails when installed to proper torque.
• Fully multi-coated glass: Enhanced transmission and contrast; crisp view of the dot and target edges.
• Alignment controls: On-housing windage & elevation adjustment lets you center the dot in the magnified view without touching your optic’s turrets.

Compatibility & Setup Notes

• Mount height matching: The included mount is ~36 mm (1.4″) absolute-co-witness. If your red dot sits higher (e.g., lower-1/3 at ~1.57″ or 1.93″), use a compatible taller magnifier mount or riser.
• Zero protocol: Always zero the red dot first at your chosen distance. Then use the magnifier’s W/E alignment to center the dot in the glass.
• Focus: Set the diopter/focus for a crisp reticle and target at your typical engagement distance. Re-check after major temperature or lighting changes.
• Rail interface: Attaches to in-spec Picatinny/Weaver rails; ensure full lug engagement and verify lever/screw tension after first live-fire.

What’s in the Box

• Vector Optics Maverick 3×26 Magnifier (SCOT-07)
• Flip-to-side mount (absolute-height, ~36 mm centerline)
• Mounting hardware & basic instructions

Technical Specifications

Summary

The Maverick 3×26 (SCOT-07) turns any quality red dot into a versatile sighting system. You get fast 1× handling, instant 3× clarity, absolute-height alignment, and simple dot-centering—without disturbing your primary zero. For hunters, competitors, and duty users who need credible reach and rapid transitions, it’s a dependable, cost-effective upgrade.